Optimalisasi Claybath Pada PabrikKelapa Sawit Menggunakan Flow Meter Coriolis dan Auto Reverse Flow Rinsing
DOI:
https://doi.org/10.59447/saintek.v17i2.147Abstract
Palm oil mill is a factory that processes Fresh Fruit Bunches (FFB) of oil palm into several products, namely Crude Palm Oil (CPO) and Palm Kernel (PK). In a palm oil mill, there is a claybath machine that is used for the process of separating shells and kernels. In general, claybath uses a manual system to set the density value, so the potential for kernel losses is very high. Therefore, the author is interested in conducting research using a mass coriolis-type flow meter and reverse flow rinsing so that the density value can be more stable, there is no error in sensor readings, and kernel loss is minimized. This research was conducted in November 2023. Located at the PT. TS Palm Oil Mill, Ogan Komering Ilir Regency, South Sumatra. In this study, it was found that optimizing the claybath using a coriolis flow meter sensor and auto reverse flow rinsing can maintain a stable density value. Auto reverse flow rinsing can minimize CaCO3 deposits in the sampling pipe, thereby increasing the effectiveness of the flow meter sensor performance on the claybath. Kernel losses in claybath can be more easily maintained so as not to exceed process parameter limits.
Downloads
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Saintek: Jurnal Sains Teknologi dan Profesi Akademi Angkatan Laut

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Setiap penulis yang mengirim artikel pada jurnal Saintek setuju untuk mengalihkan hak penerbitan pada Jurnal
seluruh artikel yang diterbitkan pada jurnal ini dilisensikan dibawah lisensi CC BY NC
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-NonKomersial 4.0 Internasional.